| Code | Diameter As Supplied (mm) |
Diameter After Recovered (mm) |
Recovered Wall Thickness (mm) |
|---|---|---|---|
| DTSR - ø9/3 | 9 | 3 | 1.8 |
| DTSR - ø13/4 | 13 | 4 | 2.4 |
| DTSR - ø22/6 | 22 | 6 | 2.7 |
| DTSR - ø33/8 | 33 | 8 | 3.2 |
| DTSR - ø40/12 | 40 | 12 | 4.1 |
| DTSR - ø45/12 | 45 | 12 | 4.1 |
| DTSR - ø55/16 | 55 | 16 | 4.1 |
| DTSR - ø75/22 | 75 | 22 | 4.1 |
| DTSR - ø85/25 | 85 | 25 | 4.1 |
| DTSR - ø95/29 | 95 | 29 | 4.1 |
| DTSR - ø115/34 | 115 | 34 | 4.3 |
| DTSR - ø130/36 | 130 | 36 | 36 |
| DTSR - ø160/50 | 160 | 50 | 4.3 |
| DTSR - ø180/50 | 180 | 50 | 4.3 |
| DTSR - ø200/60 | 200 | 60 | 4.3 |
| Property | Requirements | Test Method |
|---|---|---|
| Physical | ||
| Specific Gravity | 1.10 | ASTM D 1505 / ISO 1183 |
| Tensile Strength | 10 N/mm (min.) | ASTM D 412 / ISO 37 |
| Ultimate Elongation | 200% (min.) | ASTM D 412 / ISO 37 |
| Water Absorption (25 C) | 0.5% (max.) | ASTM D 570 |
| Thermal Ageing | ||
| Continuous Operating Temperature | -55 C to +130 C | IEC 216 |
| Shrink Temperature | 120 C (min.) | IEC 216 |
| Heat Shock (30 min. 200 C) | No cracking / No flowing | |
| Heat Ageing (168 hrs 120 C) | ||
| Tensile Strength | 7.0 N/mm (min.) | ASTM D 412 / ISO 37 |
| Ultimate Elongation | 100% (min.) | |
| Low Temperature Flexibility (-20 C) | No cracking | ASTM D 2671 |
| Electrical | ||
| Dielectric Strength | 10 kV/mm (min.) | ASTM D 149 / IEC 243 |
| Volume Resistivity | 1 x 10" 2 cm (min.) | ASTM D 257 / IEC 93 |
| Dielectric Constant | 2 (min.) To 5 (max.) | ASTM D 150 / IEC 250 |
