Superior Heat Shrinkable wraparound insulation product, Ideal for providing insulation and protection for cable jacket, Shut down of system not required for repair, High shrink ratio covers even irregular shapes
Dimension Chart for Heat Shrink Cable Repair Sleeve
| Code | L1 | D1(min.) | D2(max.) | S |
|---|---|---|---|---|
| DRS - 42/8 |
250 mm 500 mm 750 mm 1000 mm & 1500 mm |
42 | 8 | 3.0 |
| DRS - /22 | 62 | 22 | 3.0 | |
| DRS - 75/22 | 75 | 22 | 3.0 | |
| DRS - 92/30 | 92 | 30 | 3.0 | |
| DRS - 100/30 | 100 | 30 | 3.0 | |
| DRS - 122/38 | 122 | 38 | 3.0 | |
| DRS - 139/38 | 139 | 38 | 3.0 | |
| DRS - 160/55 | 160 | 55 | 3.0 | |
| DRS - 190/55 | 190 | 55 | 3.0 | |
| DRS - 210/55 | 210 | 55 | 3.0 | |
| DRS - 240/60 | 240 | 60 | 3.0 |
| Property | Requirements | Test Method |
|---|---|---|
| Physical | ||
| Tensile Strength | 10 N/mm (min.) | ASTM D 412 / ISO 37 |
| Ultimate Elongation | 200% (min.) | ASTM D 412 / ISO 37 |
| Continuous Operating Temperature | - 55 C to 120 C | IEC 216 |
| Minimum Shrink Temperature | 120 C | IEC 216 |
| Specific Gravity | 1.1 max. | ASTM D 1505 / ISO1183 |
| Dielectric Strength | 10kV/mm (min.) | ASTM D 149 / IEC 243 |
| Volume Resistivity | 10 cm (min.) | ASTM D 257 / IEC 93 |
| Low Temperature Flexibility | No cracking at - 20 C | ASTM D 2671 |
| Heat Shock (4 hours at 225 C) | No cracking, dripping or flowing | |
| Water Absorption | 0.2% max. | ASTM D 570 |
| Resistance to Fungus | Does not support growth | ASTM G 21 |
| Copper Corrosion | Non corrosive | |
