To maintain the continuity of Cable specially for long length, the cable jointing accessories and cable jointing kits came into existence. The power cable jointing kits can be Straight Through for XLPE to XLPE or PILC to PILC Cable and can be Transition Cable Joint type for connection of XLPE to PILC Cable. The voltage grade is from 1.1 kV onwards. The cable jointing system works properly in underground cable even with water stagnation in the ground. There are wide range of cable jointing kits & systems available today, which can be classified by the way they are applied such as taped type, pre-moulded / push-on / slip-on type, cold application type and heat shrinkable type. Our company manufacture cable jointing compounds in important three part systems i.e. hardener, resin and filler packed in buckets packs.
We also manufacture and supply cable jointing compounds, which are used in cable jointing kits for XLPW/PVC/PILC cables, both for medium Voltage and low Voltage. The selection criterion for an appropriate type of cable jointing system by the user should be dependent on the site conditions, operating parameters, voltage applications and cable types.