| DCS-O/15-27-38 |
| Densons Cold Shrink Outdoor Terminations upto 36 kV For XLPE Cable |
| |
|
"The term ' Cold Shrink' is applied to materials, which are capable
of shrinking without raising the material above the ambient temperature
of its immediate surroundings. The Cold Shrink Accessories are supplied
from the factory in a pre-expanded condition and placed on a removable
core. Removing the core when properly positioned over the cables
causes shrinking."
Components :
• Cold Shrink Insulation Tube
• Cold shrink Breakout
• Cold Shrink Sealing Tube
• Roll Spring
• Sealing Mastic
• Void Filler
• Copper Mesh
• Phase Color Marking Tape
• Semi-Conductive Tape
• Silicon Grease
• Copper Binding Wire
• Cleaning Tissue
• Abrasive Strap
• Plastic Glove
*Specify for lug and other components |
|
| |
 |
| Features |
|
|
- Does not require heating by flaming or any special tools.
Just pull out the plastic expansion core from the silicon
rubber center and the stress cone will tightly shrink into
position.
- Reliable, superior insulation with high-recovery elasticity;
Denson Cold Shrink employs a special silicon rubber formulation
which keeps its radial pressure. This permanently ensures
the highest integrity of environmental & electrical
protection.
- Superior hermetic sealing; for cable splicing, Denson
has adopted a triple hermetic
sealing technology.
- Easy/convenient installation: the carefully engineered
dimensions of the pre-stressed cone provides for larger
tolerances and eases installation.
- Wide Usage: Denson’s expansive customer base spans
areas that pose great difficulties to electrical equipment
usage. Our Cold Shrink product line has a long and proven
track record showing superior performance in high pollution,
salt laden, thermally divergent locations. The Cold Shrink
accessories can be widely applied in various regions. It
is especially well suited for high altitudes, cold weather,
high-humidity, salt-fog & high-pollution regions.
|
| |
|
| Specifications |
|
| TEST ITEMS OF COLD SHRINK OUTDOOR TERMINATIONS |
| TESTING
ITEMS U °/U |
TYPE
8.7/ 15 (17.5) KV |
| 50
Hz Voltage test |
39
kV, 5min, no flashover, no strite |
| Partial
discharge test |
15
kV < 1pc |
| Cyclic
load test, 3 cycles |
3
cycles under 90-95°C, 23kV |
| Impulses voltage
test |
105kV no flashover,
no strike |
| 15 min, 50 Hz
voltage with standing test |
22kV, 15 min,
no flashover, no strike |
| Salt fog test |
No any flashover,
tracking, erosion or mechanical damage occur
at 1000h, 11kV |
|
| |
| 12/20 (24) kV |
18/30 (36) kV |
| 81 kV, 5min,
no flashover, no strike |
117 kV, 5min,
no flashover, no strike |
| 31 kV < 1pc |
45 kV < 2pc |
| 3 cycles under
90-95°C, 45kV |
3 cycles under
90-95°C, 65kV |
| 170kV no flashover,
no strike |
200kV no flashover,
no strike |
| 45kV, 15 min,
no flashover, no strike |
65kV, 15 min,
no flashover, no strike |
| No any flashover,
tracking, erosion or mechanical damage occur
at 1000h, 21kV |
No any flashover,
tracking, erosion or mechanical damage occur
at 1000h, 32.5kV |
|
| |
|
| Ordering Information |
|
| |
| 11 KV OUTDOOR TERMINATIONS |
| CABLE
CROSS SECTION (Sq. mm) |
FOR
11 kV 1 CORE OUTDOOR TERMINATION (Kit Code) |
| 25
- 50 |
DCSO
11-1X1
Enquiry |
| 70
- 120 |
DCSO
11-1X2 Enquiry |
| 150
- 240 |
DCSO
11-1X3 Enquiry |
| 300
- 400 |
DCSO
11-1X4 Enquiry |
|
| |
| CABLE
CROSS SECTION (Sq. mm) |
FOR
11 kV 3 CORE OUTDOOR TERMINATION (Kit Code) |
|
25 - 50 |
DCSO
11-3X1 Enquiry |
|
70 - 120 |
DCSO
11-3X2 Enquiry |
|
150 - 240 |
DCSO
11-3X3 Enquiry |
|
300 - 400 |
DCSO
11-3X4 Enquiry |
|
| |
| 24 kV OUTDOOR TERMINATIONS |
| CABLE
CROSS SECTION (Sq. mm) |
FOR
12/20 (24) kV 1 CORE OUTDOOR TERMINATION (Kit Code) |
| 50
- 95 |
DCS0
24-1X1 Enquiry |
| 120
- 185 |
DCS0
24-1X2 Enquiry |
| 240
- 400 |
DCS0
24-1X3 Enquiry |
|
| |
| CABLE
CROSS SECTION (Sq. mm) |
FOR
12/20(24) kV 3 CORE OUTDOOR TERMINATION (Kit Code) |
| 50
- 95 |
DCSO
24-3X1 Enquiry |
| 120
- 185 |
DCSO
24-3X2 Enquiry |
| 240
- 400 |
DCSO
24-3X3 Enquiry |
|
| |
| 36 KV OUTDOOR TERMINATIONS |
| CABLE
CROSS SECTION (Sq. mm) |
FOR
18/30(36) kV CABLE (1 CORE) OUTDOOR TERMINATION (Kit
Code) |
| 50
- 95 |
DCSO
36-1X1 Enquiry |
| 120
- 185 |
DCSO
36-1X2 Enquiry |
| 240
- 400 |
DCSO
36-1X3 Enquiry |
|
| |
| CABLE
CROSS SECTION (Sq. mm) |
FOR
18/30(36) kV CABLE (3 CORE) OUTDOOR TERMINATION (Kit
Code) |
| 50
- 95 |
DCSO
36-3X1 Enquiry |
| 120
- 185 |
DCSO
36-3X2 Enquiry |
| 240
- 400 |
DCSO
36-3X3 Enquiry |
|
| |
|
