PreMoulded Cable Joints

Pre Moulded Straight Through Joint 11 kV (for XLPE Cable)

DPMS/11 kV

Features

  • Cold-applied.
  • No Special Tools.
  • Constant Radial Pressure.
  • In Built Stress Control Arrangement
  • Un limited Shelf Life.
  • In compliance with IEC-60502-4.

Specifications:

Test Item of Pre Moulded Straight Through Joint as per IEC-60502-4 / IS:13573

Testing Items U o/U 6.35/11 kV
A.C. withstand test 29kV, 5min, no flashover
Partial discharge test 11kV<10pc (Max.)
Thermal Cycles (63 cycles) under 95-100° C 16kV
Impulse voltage test 75kV no flashover
A.C. with stand test 16kV, 15 min, no flashover

Order Reference:

For 11 kV Straight Through Joints (for XLPE Cable)

Cable Cross
Section (mm2)11 kV
11 kV, Joint, 1 Core 11 kV, Joint, 3 Core
DPMSS 11 - 1 X 50 DPMS 11 - 3 X 50 Enquire Now
DPMSS 11 - 1 X 70 DPMS 11 - 3 X 70 Enquire Now
DPMSS 11 - 1 X 95 DPMS 11 - 3 X 95 Enquire Now
DPMSS 11 - 1 X 120 DPMS 11 - 3 X 120 Enquire Now
DPMSS 11 - 1 X 150 DPMS11 - 3 X 150 Enquire Now
DPMSS 11 - 1 X 185 DPMS 11 - 3 X 185 Enquire Now
DPMSS 11 - 1 X 240 DPMS 11 - 3 X 240 Enquire Now
DPMSS11 - 1 X 300 DPMS 11 - 3 X 300 Enquire Now
DPMSS 11 - 1 X 400 DPMS 11 - 3 X 400 Enquire Now
DPMSS 11 - 1 X 500 DPMS 11 - 3 X 500 Enquire Now